• Home
  • Euclid UltraSil Li+ 55 gallon Drum

Mfr:Euclid Chemical

Euclid UltraSil Li+ 55 gallon Drum

(0)(0)
Item #: EUUSLIPLUS.55U*NA

Mfr. Part #: 059L 55

Q&A(0)

ULTRASIL LI+ is a water-based lithium silicate solution used to densify, seal and dust proof concrete surfaces. ULTRASIL LI+ penetrates and chemically reacts within the concrete surface, producing extremely hard and dense calcium silicate hydrate (CSH) in the pores. The resu...

View More Details

On Back Order

Available: 0

Case Quantity: 1

Location

Available

Anaheim, CA

0

Burbank, CA

0

Denver, CO

0

Ontario, CA

0

Salt Lake City, UT

0

San Diego, CA

0

San Marcos, CA

0

Calculate Material Usage:

Coatings Calculator

(*) Minimum Quantity: 1

About This Product

Details

ULTRASIL LI+ is a water-based lithium silicate solution used to densify, seal and dust proof concrete surfaces. ULTRASIL LI+ penetrates and chemically reacts within the concrete surface, producing extremely hard and dense calcium silicate hydrate (CSH) in the pores. The result is concrete that is more durable, easier to clean, and more resistant to damage from water and mild chemicals. Because the product of the lithium silicate-concrete reaction is formed internally, the protection of ULTRASIL LI+ never peels or flakes off, is unaffected by moisture, and lasts much longer than surface sealers and coatings.


Features & Benefits

  • Seals, densifies and dustproofs concrete in one operation
  • Water-based, low VOCs
  • Treated concrete is more dense and durable
  • Permanent treatment that never peels off
  • Makes concrete easier to maintain
  • Can Contribute to LEED points (EQ Credit 4.2)

    Applications

    • Interior concrete floors
    • Commercial and retail floors
    • Diamond polishing concrete
    • Warehouse floors
    • Manufacturing plants
    • Distribution centers
    • Transportation terminals
    • Institutional floors
    • Health care facilities
    • Clean rooms
    • Mechanical rooms

    Packaging

    • Euclid UltraSil Li+ 55 gallon Drum (this item)

    Testing Standards

    • USGBC LEED Version 4, BD&C, ID&C
    • The WELL Building Standard
    • ANSI/GBI 01, Green Building Assessment Protocol

    Limitations

    • Protect ULTRASIL LI+ from freezing. In the event of freezing, thaw and stir or agitate before using.
    • Protect metal, glass, wood, paint or brick from contact with ULTRASIL LI+. If accidently oversprayed on these surfaces, wash surface with clean water immediately.
    • If added abrasion resistance is required in new construction, consider the use of a dry shake floor hardener. such as SURFLEX, EUCO-PLATE HD, or DIAMOND-PLATE.
    • Allow the product to dry 4 to 6 hours at 70 ºF (21 ºC) before exposure to foot traffic or rain.
    • In all cases, consult the Safety Data Sheet before use.

      Documents

      ULTRASIL LI+ Documents

      Specifications

      ULTRASIL LI+ Specifications

      Q & A

      true

      Ratings & Reviews

      No reviews available

      Be the first to Write a Review