Skip to main content
  • Home
  • Euclid EucoFloor Epoxy Primer 3 Gallon Unit

Mfr:Euclid Chemical

Euclid EucoFloor Epoxy Primer 3 Gallon Unit

(0)(0)
Item #: EUEPOXPRIME.3U*NA

Mfr. Part #: 003LCK 13

Q&A(0)

Roll Over To Zoom

$586.67

This is a hazardous item and will incur additional shipping charges at checkout.

EUCOFLOOR EPOXY PRIMER is a three component, high-performance bonding system, consisting of: a two component, medium viscosity epoxy (sold by Euclid Chemical) and an oven-dried, coarse silica sand (sold seperately- locally sourced by end-user). The medium viscosity epoxy is ...

View More Details

On Back Order

Available: 0

Case Quantity: 1

Location

Available

Anaheim, CA

0

Burbank, CA

0

Denver, CO

0

Ontario, CA

0

Salt Lake City, UT

0

San Diego, CA

0

San Marcos, CA

0

Calculate Material Usage:

Coatings Calculator

(*) Minimum Quantity: 1

About This Product

Details

EUCOFLOOR EPOXY PRIMER is a three component, high-performance bonding system, consisting of: a two component, medium viscosity epoxy (sold by Euclid Chemical) and an oven-dried, coarse silica sand (sold seperately- locally sourced by end-user). The medium viscosity epoxy is mixed and applied to the prepared concrete substrate, and is then immediately broadcast/”seeded” to refusal with the oven-dried coarse silica sand. This creates an aggressive surface profile that provides unsurpassed mechanical bonding for the subsequent cementitious topping.

Features & Benefits

  • Sand broadcast system provides unsurpassed adhesion for toppings and underlayments to concrete substrates
  • Epoxy formula is an easy to use 2:1 mix ratio
  • Medium viscosity epoxy ensures proper thickness to facilitate sand broadcast

    Applications

    • Bonding system for cementitious underlayments and toppings to existing, hardened concrete
    		 

    Colors

    • Part A liquid is colorless and Part B liquid is amber in color.

      Packaging

      • Euclid EucoFloor Epoxy Primer 3 gallon unit (this item)

      Limitations

      • Store EUCOFLOOR EPOXY PRIMER indoors, protected from moisture, at temperatures between 50 and 90 °F (10 and 32 °C). Condition material to 70 °F (21 °C) for at least 24 hours before using
      • Surface and ambient temperature during applications should be between 50 and 90 °F (10 and 32 °C)
      • Working time and cure time will decrease as the temperature increases, and will increase as the temperature decreases
      • In all cases, consult the product Safety Data Sheet before use

        Q & A

        true
        Warning: This product contains a chemical known to the State of California to cause reproductive harm.
        For more information go to www.p65warnings.ca.gov
        Back

        Ratings & Reviews

        No reviews available

        Be the first to Write a Review