Skip to main content
  • Home
  • Euclid Chemstop WB HD per 5 Gallon Unit

Mfr:Euclid Chemical

Euclid Chemstop WB HD per 5 Gallon Unit

(0)(0)
Item #: EUCHEMSTOPHD.5U*NA

Mfr. Part #: TL1912505

Q&A(0)

Roll Over To Zoom

$260.04

CHEMSTOP WB is a water-based, ready to use, siloxane/silane water repellent. CHEMSTOP WB REGULAR is formulated for use on dense surfaces, such as precast or poured-in-place concrete. CHEMSTOP WB HEAVY DUTY is used on porous surfaces such as light weight concrete, concrete bl...

View More Details

On Back Order

Available: 0

Case Quantity: 1

Location

Available

Anaheim, CA

0

Burbank, CA

0

Denver, CO

0

Ontario, CA

0

Salt Lake City, UT

0

San Diego, CA

0

San Marcos, CA

0

Calculate Material Usage:

Sealant Calculator

(*) Minimum Quantity: 1

About This Product

Details

CHEMSTOP WB is a water-based, ready to use, siloxane/silane water repellent. CHEMSTOP WB REGULAR is formulated for use on dense surfaces, such as precast or poured-in-place concrete. CHEMSTOP WB HEAVY DUTY is used on porous surfaces such as light weight concrete, concrete block and mortar joints.

Features & Benefits

  • Allows concrete/masonry to repel water and salts
  • Colorless & odorless
  • Non-staining, non-yellowing, breathable
  • Reduces efflorescence and spalling
  • Will not alter texture or appearance of treated surface

    Applications

    • Concrete
    • Concrete block
    • Lightweight concrete
    • Brick
    • Mortar joints
    • Precast structures
    • Horizontal or vertical
    • Interior or exterior
    		 

    Packaging

    • CHEMSTOP WB HD 5 gallon unit (this item)

    Testing Standards

    • Federal specification SS-W-110C
    • Complies with all U.S. EPA and local VOC regulations, including OTC, LADCO, Maricopa County, and California (CARB and SCAQMD)

    Limitations

    • Do not dilute
    • Temperature of air and surface must be at least 45 °F (7 °C) and rising.
    • Application at temperatures above 90 °F (32 °C) is not recommended.
    • Do not apply if rain is expected within 12 hours of application.
    • Water repellency properties will develop 24 hours to 5 days after application.
    • CHEMSTOP WB is not intended to seal cracks or withstand hydrostatic pressure.
    • Uneven application may result in a blotchy appearance of the surface.
    • Mask off/cover windows, window frames, aluminum, steel, etc. before applying CHEMSTOP WB
    • Do not apply a “fog” coat
    • Do not allow to puddle. All product should penetrate the substrate with n
    • o surface build-up.
    • Store between 40 to 90 °F (4 to 32 °C)
    • PROTECT FROM FREEZING
    • CHEMSTOP WB may exhibit minor settling upon storage. Agitation prior to use may be necessary.
    • A small (6’ x 6’) test area is strongly recommended prior to starting full application, in order to ensure desired performance results, aesthetics, and coverage rates. Allow 5 to 7 days for product to fully react before evaluating.
    • In all cases, consult the Safety Data Sheet before use

    Documents

    CHEMSTOP WB HD Documents

    Specifications

    CHEMSTOP WB HD Specifications

    Q & A

    true
    Warning: This product contains a chemical known to the State of California to cause cancer and reproductive harm.
    For more information go to www.p65warnings.ca.gov
    Back

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review