Mfr: -

Epro Ecoline S Membrane per tote of 330 gallons

(0)(0)
Item #: EPEL-S.TOTE*NA

Mfr. Part #: e.spray - 330 gal

$8,034.46

Epro E.SPRAY (Ecoline S Membrane) e.Spray is a key component to EPRO’s redundant field installed composite design concept. e.spray is a polymer modified asphalt (PMA) applied to nominal dry thicknesses of 60, 80, and 100 mils depending on the E.Series system configuration. F...

View More Details

In Stock

Available: 4

Case Quantity: 1

Location

Available

San Diego

0

Anaheim

4

Denver

0

Salt Lake

0

Ontario

0

San Marcos

0

(*) Minimum Quantity: 1

About This Product

Details

Details

Epro E.SPRAY (Ecoline S Membrane)

e.Spray is a key component to EPRO’s redundant field installed composite design concept. e.spray is a polymer modified asphalt (PMA) applied to nominal dry thicknesses of 60, 80, and 100 mils depending on the E.Series system configuration. For robust horizontal deck applications, a 120 mil reinforced option should be specified. Spray applied to form a seamless barrier, e.spray is an integral component to all E.Series systems due to its ability to further enhance and bond to a variety of materials; these material include, high density polyethylene (HDPE), polyolefin sheets, geotextile fabric, wood, metal, foam insulation, and concrete based surfaces (green concrete, shotcrete and concrete masonry units (CMU)). e.spray is applied with a proprietary self-contained sprayer designed to produce high build, monolithic, and rapidly curing membranes.

Composition

e.spray is a non-hazardous, low-viscosity, waterbased, anionic asphalt emulsion modified with a blend of synthetic polymerized rubbers and proprietary additives. e.spray is highly stable during transit and proper storage, but becomes highly reactive during the spray application to form a rapidly cured membrane with exceptional bonding, elongation, and hydrophobic characteristics.

Benefits

  • Provides a layer of seamless protection and redundancy in all E.Series system assemblies
  • Hydrophobic and resistant to methane gas
  • Non-toxic, non-hazardous, non-flammable, and VOC free
  • Forms a tenacious bond directly to concrete
  • Application to damp substrates is acceptable
  • Can be applied in below freezing temperatures with proper equipment

Limitations

  • Surfaces shall be free of dirt and debris
  • Material should be stored above 40°F and not allowed to freeze
  • Not a traffic bearing surface, additional protection required
  • Must not be applied to ponded water
  • Direct foot traffic should be limited when ambient air temperatures are greater than 100°F
  • Green concrete may require a primer coat prior to application

Ratings & Reviews

No reviews available

Be the first to Write a Review