CCW AWP Water-Base Primer For Concrete 5 Gallon Unit

CCW AWP is a single-component latex-based contact adhesive. CCW AWP is an accessory product to the CCW waterproofing membranes and is designed to set the dust on concrete to promote adhesion of the CCW waterproofing membrane to the substrate.

Application

CCW AWP can be roller- or spray-applied at a coverage rate of 400 ft2 (37.2 m²) per gallon (3.8 liters). Several types of sprayers- Airless, Air Assist, Hudson- may be used. (CCW AWP may also be applied using a roller. However, caution must be taken not to apply excess contact adhesive which could cause longer drying times.) Normal drying time will be approximately 30 minutes depending on weather conditions. Upon curing, CCW AWP will not transfer when touched. Exposed surfaces must be reprimed as they may collect dust and other contaminants causing adhesion problems. CCW AWP should be applied at temperatures above 40°F (4.4°C). Apply to surface the same day of application of waterproofing membrane.