Skip to main content
  • Home
  • Arizona Polymer Polyurethane 250 Non-VOC 1.5 Gallon Unit - Clear Gloss

Mfr:Arizona Polymer Flooring

Arizona Polymer Polyurethane 250 Non-VOC 1.5 Gallon Unit - Clear Gloss

(0)(0)
Item #: AFU250NV.1+U*CL

Mfr. Part #: 01-P250-1.5K

Q&A(0)

APF POLYURETHANE 250 is a two-component, low viscosity acrylic urethane for use as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete. APF POLYUR...

View More Details

On Back Order

Available: 0

Case Quantity: 1

Location

Available

Anaheim, CA

0

Burbank, CA

0

Denver, CO

0

Ontario, CA

0

Salt Lake City, UT

0

San Diego, CA

0

San Marcos, CA

0

Calculate Material Usage:

Coatings Calculator

(*) Minimum Quantity: 1

About This Product

Details

APF POLYURETHANE 250 is a two-component, low viscosity acrylic urethane for use as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete. APF POLYURETHANE 250 is UV stable for use in exterior applications, cures rapidly, and may be re-coated with both solvent-based and water-based polyurethanes. When used as a finish coat, this material creates a hard, high gloss surface that offers excellent stain resistance and easy cleanability. Compared to solvent-based acrylic sealers, APF POLYURETHANE 250 offers substantial improvements in gloss retention, and overall performance. APF POLYURETHANE 250 is available in a satin finish. A low VOC version of this material is available to meet environmental regulations.

APF POLYURETHANE 250 is designed for application over concrete, acid stained surfaces, and various types of architectural concrete. It has excellent performance as a sealer for pavers and new saltillo tile. It is suitable over acid stained concrete as it is unaffected by pH drifts that can affect the adhesion of other types of primers. When applied over acid stains or integrally colored concrete, it gives color enhancement similar to solvent acrylic sealers.

APF POLYURETHANE 250 can also be applied as a tie coat over difficult to adhere to surfaces such as polyester urethane. When applied as a finish coat in vehicle areas, it resists tire marking and provides an easily cleaned surface.

  • Resistant to fuels and many common chemicals
  • Hard, high-gloss, easily cleaned surface
  • Graffiti resistant when used as wall surface

Applications

  • Finish for Color Quartz and Vinyl Mosaic Flake systems
  • Finish for Armor-Rez Concrete Grind & Seal System
  • Automotive facilities
  • Warehouses
  • Aircraft Hangars
  • Retail & Dining

Packaging

  • Supplied Clear & Clear Satin Finish, in complete A+B 1.5 gallon (5.7 L) or 15 gallon (56.8 L) total volume mixed units. Mix ratio 2A : 1B

Limitations

  • Do not apply POLYURETHANE 250 Satin direct to concrete, apply only to primed surface.
  • Prior to application, measure and confirm that ambient temperature and humidity conditions are at least 5ºF over dew point.
  • Use of kerosene or propane forced air heating equipment during application may cause discoloration and finish defects.
  • Use only acetone in new, unopened, and tightly sealed containers. Moisture contamination may occur if old solvent is used.

Documents

APF Polyurethane 250 Documents

Specifications

APF Polyurethane 250 Specifications

Q & A

true
Warning: This product contains chemical(s) known to the State of California to cause cancer and/or to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov

Ratings & Reviews

No reviews available

Be the first to Write a Review