Eternabond Doublestick 30 Mil 3" Roll

DoubleStick is pure EternaBond advanced MicroSealant with a removable siliconized release liner on each side. Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials. DoubleStick creates a tight, permanent, waterproof seal. Remains flexible to temperatures as low as -70° F, making it virtually impossible to thermally shock the seal. DoubleSeal utilizes EternaBond’s advanced MicroSealant Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber (non butyl) with a built-in primer, between two silicone release liners.

Applications

• DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces.
• Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealant to form a gasket, seal a gap or seal, or as needed.

DoubleStick bonds to a wide range of surfaces including:

• EPDM
• TPO
• Most PVC
• CSPE/Hypalon
• CPE
• SBS
• APP modifieds
• Asphalt BURs
• Coal tar BURs
• Tiles
• Shingle
• Coated and non-coated aluminum and metal roofs
• Galvanized steel
• Gypsum board
• Wood
• Polyethylene
• Propylene
• Polystyrene
• Fiberglass
• Brick
• Concrete
• Masonry
• OSB board
• Shielding membranes

Packaging

• Doublestick comes in standard rolls 30 mils, 40 mils, 60 mils or 80 mils thick, 50' long, and 2", 3", 4", and 6" wide.